Primare I15 Prisma networked amplifier Lab Report

As I noted in our Classy Class D sidebar the full bandwidth of the I15 is only realised via its digital inputs as the analogue line input is sampled at 48kHz and the response thus limited to ~20kHz. Otherwise the amplifier’s response scales with incoming sample rate, reaching –0.6dB/20kHz, –1.8dB/45kHz and –4.88dB/90kHz with 44.1/48kHz, 96kHz and 192kHz files, respectively. Volume is another matter however, for digital inputs are limited to a maximum safe ‘position’ of 55 out of 99. At volume ‘54’ a 0dBFs digital input delivers a maximum 64W at 0.017% THD and at ‘55’ the same peak level 0dBFs delivers 71W/8ohm, when the amplifier is in clipping. The analogue input yields finer control, revealing the I15’s true capacity of 72W/8ohm, 140W/4ohm and 72W, 140W, 255W and 161W under dynamic conditions into 8, 4, 2 and 1ohm loads [see Graph 1]. The fact that both continuous and dynamic outputs are identical, and almost precisely double from 8-to-4ohm, is a textbook result for a Class D amplifier with a very capable (switch-mode) power supply.

1018primare.lab1.jpg

Dynamic power output versus distortion into 8ohm (black trace), 4ohm (red), 2ohm (blue) and 1ohm (green) speaker loads. Max. current is 12.7A

1018primare.lab2.jpg

THD vs. digital level (1kHz, black; 20kHz, blue) where 0dBFs = 70W/8ohm and –18.5dBFs = 1W/8ohm

Distortion scales gently with output and with frequency via all inputs, from 0.00045%/20Hz to 0.003%/20kHz at 1W and 0.0045%/20Hz to 0.013%/20kHz at 10W/8ohm. The lowest distortion is achieved at –15dB to –25dB below full output [see Graph 2]. The A-wtd S/N ratio is as expected for the Hypex UCD102 module at 87.2dB (re. 0dBW) and slightly better at 89.3dB with digital inputs (re. 0dBFs/0dBW). The maximum A-wtd S/N ratio (re. 70W) is 106.7dB. Jitter is impressively low courtesy of the AKM AK4490 DACs at 175psec/48kHz and 160psec/96kHz (the Hypex modules are analogue in design and therefore cannot contribute to ‘jitter’, only intermodulation). PM

Continuous power (<1% THD, 8/4ohm): 72W / 140W
Dynamic power (<1% THD, 8/4/2/1ohm): 72W / 140W / 255W / 161W
Output impedance (20Hz–20kHz): 0.058–0.066ohm
Freq. resp. (20Hz–20kHz/90kHz): +0.0 to –0.12dB/–4.88dB
Distortion (20Hz-20kHz, 0dBFs/0dBW): 0.0012–0.0015%/0.0044-0.002%
A-wtd S/N ratio (re. 0dBFs/0dBW): 89.3dB (Dig) / 87.2dB (Analogue)
Digital Jitter (48kHz/96kHz @ 10W): 175psec / 160psec
Power consumption (idle/rated o/p): 19W / 145W (2W, standby)
Dimensions (WHD / Weight): 350x73x329mm / 6.4kg
Price: £1600

COMPANY INFO
Primare AB
Sweden
Supplied by: Karma-AV Ltd, York
01423 358846
ARTICLE CONTENTS

X